designed to deliver the purest
OUR PRODUCTS
Silicon Carbide Nanopowder (5-250nm)
Along with the listed NanoCeramics many other ceramics were produced as trial batches. Basic technology permits to produce nearly any ceramic in nanosized form, thus we are expecting here the concrete wishes from our customers. We are ready to change product quality in case of special requirements.
Description
| Particle shape: cubic, hexagonal, fragmental, single fibers |
| Particle size full range: 5 - 250 nm |
| Average particle size: 25 - 50 nm |
| Specific surface: > 18 m2/g |
| Bulk density: 0.23 - 0.35 g/cm3 |
| Purity: > 98.6% |
| Controlled admixtures, %: Al < 0.03; Mg < 0.03; Na < 0.03; Fe < 0.1; |
| Cu < 0.4; W < 0.2 |
| X-Ray: SiC hexagonal, 98%, lattice: a =3.082 Å, b =3.082 Å, c =15.1006 Å |
| SiC hexagonal, 2%, lattice: a = 3.082 Å, b = 3.082 Å, c = 37.70 Å |
Pack Sizes
| Catalogue No. | Quantity |
| RN -PL -PJ-SiC-5g | 5g |
| RN -PL -PJ-SiC-25g | 25g |
| RN -PL -PJ-SiC-100g | 100g |
SiC - Nanopowder (150 - 200 nm)
Description
| Average particle size: 150 - 200 nm |
| Specific surface area: 9.8±0.8 m2/g |
| Purity: > 99.5% |
| Controlled admixtures, %:free C< 0.05; free Si < 0.05; SiO2< 0.1 |
| X-Ray analysis: cubic phase >99% |
| Zeta Potential: -26mV |
Pack Sizes
| Catalogue No. | Quantity |
| RN -PL -CT-SiC-5g | 5g |
| RN -PL -CT-SiC-25g | 25g |
| RN -PL -CT-SiC-100g | 100g |
SiC - Nanopowder 20nm
Description
| Average particle size: 20±7 nm |
| Specific surface area: 80±7 m2/g |
| Purity: > 99.0% |
| Controlled admixtures, %: Cfree< 0.75; Sifree < 0.25; O< 1.25;Cl <0.25 |
Pack Sizes
| Catalogue No. | Quantity |
| RN -PL -HK-SiC-5g | 5g |
| RN -PL -HK-SiC-25g | 25g |
| RN -PL -HK-SiC-100g | 100g |
[ REINSTE.com ]